|
|
- Smashing equipment series
- Emulsifying equipment series
- Dispersing equipment series
- Homogenizing equipment series
- Mixing filter series
- Optimizing and emulsifying asphalt
- Fuel emulsifying equipments
Complete sets of equipment
|
|
DSY type Lo-of mixer |
| 1.Application areas |
◆ Agriculture : pesticides, fertilizers, feed and the production of various additives mixed
◆ Food industry : baby food, cocoa, pet food, powdered milk, salt, starch mixed.
◆ Drying : powder dry.
◆ Chemical industry : abrasive material, catalysts, ceramics, dyes, plastics, polyester, cosmetics and detergent industries mixed. |
| 2..Characteristics |
◆ It applies to solid (powder) - solid (powder) mixing
work and also to solid (powder) - liquid mixing work.
◆Operational environment: atmospheric pressure. One direct drive device force the equipment work, special torque controlled coupling can make the machine start work at full load condition in order to prevent the dangers of overload.
◆ We can design the jackets with vacuum, with cooling or heating according to customers request.
◆ Mixing rapidly, the general powders only need about ten minutes.
◆ You can choose the manual, electric, pneumatic way for material discharging. |
|
| 3.Working principle |
The structure of the Lo-of mixer is shown as the figure. It is constituted by drive, "U" - type cylinder, Lo of the mixer, machine lid, support structure, outlet and other parts.
The electromotor forces the Lo-of mixer rotate through the reducer, which makes the materials move up and down at one hand and at another hand makes the materials convection between outer and inner as a result of the feather of the Lo so that we get homogeneous mixture.
It has three standard mixing designing: continuous-Lo, interrupt-Lo and blades, you can choose which way according to output from the center or the bottom. |
Model |
Handling capacity(m3) |
Power(KW) |
Main shaft speed(r/min) |
Three-dimensional shape(mm) |
Length A |
Width B |
Height H |
DSY-1 |
0.028 |
1.1 |
80 |
1050 |
600 |
700 |
DSY-5 |
0.142 |
2.2 |
60 |
1700 |
1000 |
1030 |
DSY-10 |
0.283 |
5.5 |
60 |
2200 |
1020 |
1000 |
DSY-18 |
0.5 |
7.5 |
55 |
2500 |
1100 |
1130 |
DSY-25 |
0.7 |
11 |
45 |
2550 |
1250 |
1200 |
DSY-36 |
1.0 |
15 |
45 |
3010 |
1810 |
1200 |
DSY-52 |
1.5 |
18.5 |
40 |
3100 |
1950 |
1350 |
DSY-71 |
2.0 |
18.5 |
35 |
3800 |
2180 |
2130 |
DSY-100 |
2.8 |
22 |
25 |
4210 |
2300 |
2180 |
DSY-180 |
5.1 |
37 |
20 |
4720 |
2920 |
2240 |
DSY-270 |
7.6 |
45 |
20 |
5000 |
3400 |
2350 |
DSY-515 |
14.6 |
90 |
15 |
6450 |
4000 |
3200 |
|
Notes: 1. Power changes dynamically according to the feather of the materials. The table above is based on the momentum of materials proportion of 512kg/m3 and no liquidity calculated. Machines installed materials maximum weight (kg) = work volume (m3) × 512kg/m3.
2. The standard type is without jacket or liquid spraying device. If necessary, orders will be asked to state. |
|
|
|
|
|
